Battery Fighter bca1702wr Instruction Manual

Manual is about: intelligent battery charger for both lead acid & lithium (lipo & lifepo4) 12v automotive batteries

Summary of bca1702wr

  • Page 1

    Bca1702wr - 140717 instruction manual this manual contains important safety and operating instructions. Please save these instructions. Keep with or near charger at all times. 1. Warning – risk of explosive gases. A. Working in the vicinity of a lead-acid battery can be dangerous. Batteries generate...

  • Page 2

    Bca1702wr - 140717 eye with running cold water for at least 10 minutes and get medical attention immediately. E. Never smoke or allow a spark or flame in vicinity of battery or engine. F. Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery ...

  • Page 3

    Bca1702wr - 140717 c. Connect the positive (red) clip from the battery charger to the positive (pos, +) post of battery. D. Position yourself and the free end of cable as far away from battery as possible, then connect negative (black) clip from the battery charger to free end of cable. E. Do not fa...

  • Page 4

    Bca1702wr - 140717 selection for battery type a.C. Power is connected with the wall socket properly press mode button for battery charge mode selection before you connect the charger to the battery terminals. Led signal explanation description lifepo4 lifepo charging lithium iron phosphate (lifepo4)...

  • Page 5

    Bca1702wr - 140717 charging normal charge processes are commenced. The charger is delivering constant current & voltage to the battery. To charge large capacity batteries the charger may remain in this mode for several hours or even days. The charging led is in red when the battery capacity is less ...

  • Page 6

    Bca1702wr - 140717 glowing mode press the mode button for the program of car memory saver function car memory saver connect the obdii plug to the obdii port of the car for data backup during battery replacement. (location of obdii underneath the dash board or beside the fuse box) the power & car mem...

  • Page 7

    Bca1702wr - 140717 9 stage charge, conditioning and maintenance process map 9 stage lead acid charge, conditioning and maintenance process 1. Qualification phase: initially ensures the battery is in good condition prior to launch of normal charge processes, as a safety measure charge processes will ...

  • Page 8

    Bca1702wr - 140717 lifepo & lipo charging mode (lithium battery charge mode) 4 stage charge process map in the absorption phase the battery is given constant voltage while current is reduced based on actions taken from ongoing battery monitoring until the battery is 100% charged. 8. Analysis (check)...

  • Page 9

    Bca1702wr - 140717 technical specifications: model: bca1702wr input: auto-switching 100v- 240vac 50/60hz output: 12vdc 1.8a / 7a (lead acid), 12vdc 5.5a (lipo), 12vdc 7a (lifepo4) max charge current: 7a max. Voltage: 14.8v(lead –acid (pb) battery charging) 14.5v (life po4 battery charging) 16.9v (li...