1. DL manuals
  2. Bauer
  3. Power Tool
  4. 1632E-B
  5. Owner's Manual & Safety Instructions

Bauer 1632E-B Owner's Manual & Safety Instructions

Manual is about: 35 LB PRO Demolition Hammer Kit

Summary of 1632E-B

  • Page 1

    Visit our website at: http://www.Harborfreight.Com email our technical support at: productsupport@harborfreight.Com owner’s manual & safety instructions save this manual keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Wr...

  • Page 2: Table Of Contents

    Page 2 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p table of contents safety ......................................................... 2 specifications ............................................. 8 setup ..................................

  • Page 3: Work Area Safety

    Page 3 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p work area safety 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flamm...

  • Page 4: Power Tool Use and Care

    Page 4 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p power tool use and care 1. Do not force the power tool. Use the correct power tool for your application. Safer at the rate for which it was designed. 2. Do not use the power tool if the...

  • Page 5: Vibration Safety

    Page 5 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p 16. Warning: some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known to the state of california to cause cancer and b...

  • Page 6

    Page 6 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p grounding to prevent electric shock and death from incorrect grounding wire connection: check with a qualified electrician if you are in doubt as to whether the outlet is properly groun...

  • Page 7: Extension Cords

    Page 7 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p extension cords 1. Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outle...

  • Page 8: Assembly

    Page 8 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p specifications electrical input 120 vac / 60 hz / 15 a no load blows per minute 1300 bpm chisels 1 bull point (included) 1 flat point (included) other accessories chisel grease carbon b...

  • Page 9: Functions

    Page 9 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p functions trigger trigger lock auxiliary handle knob auxiliary handle chisel lock pointed chisel figure a.

  • Page 10: Tool Set Up

    Page 10 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p operating instructions read the entire important safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this pr...

  • Page 11

    Page 11 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p mounting chisels with a collar 1. Important! Wipe clean, then grease chisel’s shank using included chisel grease. Note: keep chisel shank clean. Do not lay in dirt or dust. 2 3 retaini...

  • Page 12: Cleaning and Maintenance

    Page 12 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p maintenance and servicing procedures not specifically explained in this manual must be performed only by a qualified technician. Note: the demolition hammer will cease operation once c...

  • Page 13: Troubleshooting

    Page 13 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p troubleshooting problem possible causes likely solutions tool will not start. 1. Cord not connected. 2. No power at outlet. 3. Tool’s thermal reset breaker tripped (if equipped). 4. In...

  • Page 14

    Page 14 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p parts list and diagram part description qty 7 flat washer 10 10 8 spring 6 11 o-ring Ø40xØ3.5 1 12 second striker 1 13 spring seat 1 14 spring 1 15 fix coat 1 16 o-ring 69x2 1 17 rubbe...

  • Page 15: Assembly Diagram

    Page 15 for technical questions, please call 1-888-866-5797. Item 63438 s afet y op era tion m aintenan c e s etu p assembly diagram.

  • Page 16

    Please read the following carefully the manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make ...