Bauhn apas-114 Instruction Manual - Power Source
6
1300 886 649
Model: APAS-114 Product Code: 47396 10/2015
www.tempo.org
AUS
Getting Started
Power Source
This system can be powered in three different ways:
(a) By connection to the mains power supply with the supplied power cord.
(b) Via the rechargeable 12V 4.5Ah built-in battery.
(c) Via an external DC power supply (not included).
AC Mode (mains power supply)
• Connect the power cable to the AC power input, then insert the plug into an
appropriate wall outlet.
• Set the AC POWER SWITCH to ON.
• Set the POWER SOURCE to AC mode. The system is now in operating mode and
will be powered by ~230V/50-60Hz.
DC Mode
• If the equipment is connected to the mains power supply, disconnect the power
cable.
• Set the AC POWER SWITCH to OFF.
• Set the POWER SOURCE to DC INPUT.
•
External DC power supply
To power the unit via an external DC power supply, connect the external power
supply's positive pole to the red terminal and the negative pole to the black terminal.
The system will now be powered by the external DC power supply.
NOTE: The external DC power supply must be DC 12V-15V with a minimum output
power of 50W.
•
Internal 12V 4.5Ah battery power supply
If no external power supply is connected, the system will automatically be powered
by the
built-in 12V 4.5Ah battery when the power source is set to DC INPUT.
AC Power Switch
• Set to ON to use the equipment in AC mode, or to charge the built-in battery.
• Set to OFF to use the equipment in DC mode.
• To switch the system OFF, set the POWER SOURCE to AC mode and the AC POWER
SWITCH to OFF.