Bauhn apas-114 Instruction Manual - Wireless Technology
8
1300 886 649
Model: APAS-114 Product Code: 47396 10/2015
www.tempo.org
AUS
Instructions
Streaming Audio via Bluetooth
®
Wireless Technology
Pairing With a New Bluetooth Enabled Device
• Press the Source Button repeatedly until Bluetooth mode is selected. A beep will
sound and the Bluetooth indicator light will start flashing fast. The DJ System is now
ready for pairing.
• Turn on the Bluetooth function of your device and scan available Bluetooth enabled
devices nearby.
• Select “APAS-114” from the device list to pair. Enter ‘0000’ if your Bluetooth enabled
device prompts you for a passcode.
• If pairing is successful, the Bluetooth indication light will stop flashing. If you play a
song, the Bluetooth indication light will flash slowly.
• If you cannot pair the DJ System with your Bluetooth enabled device, turn both the DJ
System and your Bluetooth enabled device OFF and ON and then try again.
NOTE: If your Bluetooth enabled device does not support A2DP, you might not be able
to pair with the DJ system.
Connecting to Bluetooth Devices Stored in Memory
• Turn on the DJ System and press the SOURCE button to select Bluetooth mode. The
DJ System will start searching for the previously paired devices. If an available device
is found, the system will connect to the Bluetooth device automatically.
Playing Audio Via Bluetooth Wireless Technology
After successful connection you can play music from your Bluetooth enabled device
wirelessly on the DJ System.
• Press the
button to play or pause music.
• Press the
or
button to skip to the previous or next track.
NOTES:
• Refer to the manual of your Bluetooth enabled device for more information about the
Bluetooth function on the device.
• If your Bluetooth enabled device does not support A2DP profile, it can be paired and
connected but will not play audio through the DJ System.
• When you pair and connect your computer to the DJ System, you may need to
change the sound setting on your computer.