Bauhn HE170751 Instruction Manual - Instructions
9
1300 663 907
customercare@winplus.com.au
Model Number
HE170751
After Sales Support
Charging the battery
Before first use, it is recommended you charge your Bauhn Premium
Headphones for a minimum of 1 hour.
1.
Insert the small end of the included Micro USB cable into the Micro USB
connector on the headphone’s right ear pad
2.
Connect the other end of the charging cable to a USB port on your PC
or laptop
3.
The LED light will show a solid red colour to indicate charging is active
4.
The light will turn green when fully charged
NOTE:
• Charge only with 5V DC 500mA input
• Use only the original Micro USB charging cable to avoid any damage
• When the LED flashes red, the battery is low, charge the headphones
Power On/Off
To Turn On the Bauhn Premium Headphones:
1.
The power switch is located below the volume control, press the power
switch upwards
2.
The headphones will state “power on” when the headphones are turned on
To Turn Off the Bauhn Premium Headphones:
1.
Press the power switch downwards. The power switch is located below the
volume control
2.
The headphones will state “power off” when the headphones are turned off
Pairing to a mobile device
Activate headphone pairing mode:
1.
While the Bauhn Premium Headphones are on, press and hold the button
for 5 seconds
2.
The Bauhn Premium Headphones will then enter pairing mode and the LEDs
on the bottom will flash red and blue
3.
The Bauhn Premium Headphones will then give an audio cue of “pairing”
NOTE: On first use the headphones will automatically enter pairing mode.
Search for the headphones
1.
Enter the Bluetooth settings on the device you would like to connect to
2.
Search for the device “Bauhn Headphones” and pair as per your MP3 player
or smartphone’s instruction manual
3.
When the Bauhn Premium Headphones are successfully paired with your
device, the headphones will give an audio cue of “your device is connected”