Bauhn HE214018 Instruction Manual - page 12
12
After Sales Support - Help Desk
Telephone:
1300 663 907
Internet:
www.winplus.com.au
Question
Answer
No power on charging dock
- Ensure the power adaptor is plugged into
the base unit and switched on at the wall
outlet.
- If you have inserted batteries, try replacing
the batteries in case they are flat.
- If you have inserted batteries, check the
correct polarity has been used.
No power on headphones
- Ensure the headphones are in ON mode.
- Try charging the headphones for 1hr to
ensure sufficient charge for the built in
battery
- If you have inserted batteries, try replacing
the batteries in case they are flat.
Excessive interference or noise
- Try switching wireless channels by selecting
1, 2 or 3 on the base station.
- Press SCAN to select the new channel.
- Move the base unit away from any cordless
phones or wireless devices
- Remove any obstacles between the
headphones and base unit.
Volume buttons do not work when the
headphones are connected directly to
my audio device.
- When the headphones are connected
directly to your audio device they act as
passive wired headphones only. Change the
volume levels on your audio device to adjust
the volume.
Frequently Asked Questions