Bauhn HE214018 Instruction Manual - page 8

8

After Sales Support - Help Desk

Telephone:    

1300 663 907

Internet:  

           www.winplus.com.au 

Instructions

Power On/Off

To use your Bauhn Cordless Headphones wirelessly, the base unit will require 

power. You can power the base unit using the included power adaptor or by 

inserting batteries. Refer to p 10 for details on using batteries with the unit. 

1.  Insert the jack of the power adaptor to the rear of the base unit.

2.  Plug in the power adaptor to a mains outlet and switch the outlet on. 

3.  Move the switch on the back of the base unit to channel 1, 2 or 3

4.  The LED on the front of the base unit will turn green when connected to 

power (or red when charging the headphones).

Charging 

The Bauhn Cordless Headphones have a built-in rechargeable battery.  

The base unit will recharge the headphones when they are docked. 

1.  Insert the plug of the power adaptor to the rear of the base unit.

2.  Plug in the power adaptor to a mains outlet. Turn the power on at the mains 

outlet. 

3.  The power LED on the front of the base unit will turn green when connected 

to power.

4.  Place the headphones on the cradle. Ensure the contacts on the base unit 

and the headphones line up.

5.  The power LED on the front of the base unit will change to red while the 

headphones are charging.

6.  When fully charged, the power LED will return to green. 

Note: You can only recharge your headphones while connected to  

mains power.