Bauhn HE21404 Instruction Manual - page 8
8
After Sales Support - Help Desk
Telephone:
1300 663 907
Internet:
www.winplus.com.au
Mounting Antenna
The Bauhn Outdoor Antenna Kit includes everything you need to mount
your antenna on your home or other outdoor location. Included with the kit
are masonry anchors and timber screws. Refer to the installation tips on p.6
for antenna installation advice. Consult a professional if you are unsure or
unclear on any steps.
1. Select the location you wish to mount the antenna using the included
faceplate.
Note: It is recommended you check the reception using your TV before
you mount the antenna permanently. Ensure the 12m cable will reach
your TV from where you the mount antenna.
A.
Timber Mounting:
Included with the kit are 4 x 35mm x Ø 5mm wood screws.
a. Hold the faceplate against the timber then mark the area with a pencil to
note the location of the mounting holes.
b. Drill pilot holes using a timber drill bit (~ 3mm) to assist in mounting.
c. Place the faceplate against the timber.
d. Insert the wood screws through the holes in the faceplate, lined up
against the pilot holes you have drilled.
e. Tighten the timber screws to hold the faceplate securely.