Biostar IDEQ 330P Supplementary Manual - page 12
Power Source Header for FIO3/4: FIO_USBV1
Note:
In order to support this function “Power-on system via USB device,” “FIO_USBV1” jumper cap
should be placed on Pin 2-3 individually.
Close CMOS Header: JCMOS1
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS
data, please carefully follow the procedures to avoid damaging the motherboard.
Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
Assignment
Description
+5V for FIO3/4 (Default)
FIO3/4 powered with standby voltage of 5V
+5V
+5V standby Voltage
Pin 1-2 close
Pin 2-3 close
JCMOS1
Assignment
Normal Oaration (Default).
Clear CMOS data.
Pin 1-2 close
Pin 2-3 close
1
3
1
3
1
3
1
3