BioZone MZ-II (Heavy Duty) Owner's Manual - Operation Instructions
OPERATION INSTRUCTIONS
– MODEL: MZ-I / MZ-II (Heavy Duty)
______________________________________________________________
1.
Proper placement of BioZone MZ-I / MZ-II (Heavy Duty)
Recommended to install on a fixed surface inside your vehicle.
The unit must not be installed on the dash or on the deck at the rear window
as sudden acceleration or deceleration may cause the unit to fall.
Do not install where exposed to direct sunlight.
Air intake openings may not be covered.
Do not face the unit directly toward a person or pet.
Do not install on a metal surface.
2.
Plasma/Ozone smell:
Your unit produces what we call Photo Catalytic PureWave. Initially, the output of
this process is consumed when purifying VOC’s, bacteria odors and other
impurities. However, during extended use an element of PureWave may produce
a metallic smell. This is a sign of over production of Ozone. When this smell is
clearly present, unplug your unit for a while and restart as needed to reduce
contaminates.
3.
PhotoPlasma lamp Lifespan and replacement:
BioZone units are easy to service. The only replacement part is the lamp. The
lamp should be replaced once a year. CAUTION!
Disconnect the device from the
power-supply network before cleaning or servicing.
BEFORE OPERATING YOUR BIOZONE UNIT,
READ ALL INSTRUCTIONS IN THIS GUIDE CAREFULLY.