Birlea CORONA 3 DOOR WARDROBE Assembly Instructions Manual
Vendor: S000242
Page 1 of 11
ASSEMBLY INSTRUCTIONS
CORONA 3 DOOR WARDROBE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CORONA 3 DOOR
WARDROBE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations
On unpacking you may notice an odour due to the production process. This will disappear after a period of
time.
DO NOT place the item next to a radiator or direct sunlight. The item is manufactured in pine but is
susceptible to temperature change. It’s recommended an even room temperature be maintained with no
sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item, use a placemat or marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
To retreat the surface to maintain the original finish use block wax (un-perfumed) and follow the
manufacturer’s instructions carefully
DO NOT place the item onto wet or damp flooring as staining may occur to the floor
www.birlea.com