Birlea CORONA 3 DOOR WARDROBE Assembly Instructions Manual - page 5
Vendor: S000242
Page 5 of 11
Step 2:
Attach the left frame (10) to the left panel (2), then attach the right frame (11) to the right panel (1)
using hardware part A. Attach the base side plinths (5) using hardware part A. Attach the top side plinths
(14) using hardware part P. You will need to use a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3:
Fix the centre frame (21) to the centre panel (22) using hardware part A and a screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4:
Attach the centre panel (22) to the top panel (7), top shelf (8) and base panel (3) using hardware
parts A and K with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.