BIS ULTIMA-1 506128-23 Installation And Operation Instructions Manual - page 23
CLEARANCE TO COMBUSTIBLES
The following clearances meet the minimum requirements for a safe
installation:
Side wall: 17” (324 mm) measured from the fireplace side.
Ceiling: 6’ 8” (2,032 mm) measured from the base of the fireplace.
Fireplace enclosure:
Bottom: 0”
Side: 0” to spacer
Back: 0” to spacer
Top: Do not fill the space above the fireplace with any material
(Except the wood framing. See Page 10, Figure 9).
Chimney: 2” (50 mm)
Mantel: 45” (1143 mm) measured from the base of the fireplace.
BIS
®
Ultima-1 Replacement Parts
Description
Cat./Part No.
Baffle refractory (2 pieces)
PR-ISO2205
Back refractory
PR-SR2203
Right side refractory
PR-SR2204D
Left side refractory
PR-SR2204G
Bottom refractory
PR-SR2201
Front refractory, right side - ash lip
PR-SR2202D
Front refractory, left side - ash lip
PR-SR2202G
Door handle
PR-SR1787
Ceramic glass panel Contemporary
PR-SR2222
Ceramic glass panel Victorian
PR-SR2230
Secondary air tube
PR-SR2271
Cast-iron log supports (2)
PR-SR2245
Touch-up paint, aerosol, black metallic SBMB6309
H8159
Louvers, upper and lower (1)
PR-SR2218-1
Snap disc, blower
VTU
Bracket, secondary air tube
PR-SR2214
Hinge assembly, fireplace and door
PR-SR2395UL
Door handle rod and mechanism
PR-SR2118
Door handle and brass cap
PR-SR2325
Door handle brass cap
POIGNE002
Gasket, door, 73” (5/8” dia.)
PR-SR1823G
Gasket, glass, 69” (5/16” dia.)
PR-SR1685D
Blower 250 CFM for central forced air kit, BISZY
BISZY
Blower variable speed control with decorative wall plate
for (BISZY), VRUW
VRUW
Thermo-disk, on/off blower control (for BISZY), VTU
VTU
Blower to flexible pipe adaptor, BISAVF
BISAVF
Backdraft damper, BISBD
BISBD
Fireplace to Flex adaptor and 2 clamps, BISAF
BISAF
REPLACEMENT PARTS LIST
SPECIFICATIONS
Cat. No.
Model
BISULTIMA-1
BIS Ultima-1
Product Reference Information
Weight
385 lbs
Height
36”
Width
36”
Depth
24-1/2”
Firebox W x H x D - measured in front
22” x 11-3/4” x 12”
Chimney weight ASHT (6” dia)
6.25 lb per linear foot
Chimney weight AC (6” dia)
3.25 lb per linear foot
Chimney weight S2100+ (6” dia.)
10.8 lb per linear foot
Contact an IHP dealer to obtain any of these parts. Never use substitute
materials not approved by IHP. Use of non-approved parts can result
in poor performance and safety hazards.
23