Bissell 1189 SERIES User Manual - Using Your Hand Vacuum
Using your hand vacuum
1. Remove the hand vac by pressing the release
button
2. The power button is located on top of the grip
area – push ON (i) to start cleaning.
3. easily clean messes on furniture, stairs, and
other hard to reach areas.
4. To use the accessory tools, simply insert the
base of the tool into the end of the nozzle.
TiP: Accessories can be combined together or
used individually.
5. When done cleaning, simply push the power
button to OFF (O) and replace the hand vac on
the body of the product.
Operations
Maintenance & Care
To maintain maximum cleaning performance, the
following maintenance steps must be performed.
Emptying the Debris Bin
Debris bin should be emptied before debris
reaches the FUll line on the bin
1. Turn power OFF (O) and remove hand vac
from unit as directed in step 1 “Using your hand
vacuum”.
2. Hold the hand vacuum vertically and depress
the release button to release debris bin.
3. Gently pull debris bin away from the body of
the hand vac and remove the filter and separator.
4. empty debris into waste container.
5. Open the clear cap of the cyclonic separator,
wipe away any debris inside, and discard.
6. Replace filter and separator back into debris
bin and attach debris bin to hand vac until it
snaps securely in place.
www.bissell.com
800.237.7691
6
WaRnInG
Do not operate cleaner with damp or wet filters
or without vacuum bags and all filters in place.
1.
4.
2.
Power switch
Release button
WaRnInG
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
3.
2.
5.