Bissell 1189 SERIES User Manual - Disposal Of Batteries:
www.bissell.com
800.237.7691
Maintenance & Care
Brush roll reset:
if larger debris becomes lodged in the foot of
the unit and the brush roll shuts off, turn the unit
off and remove the obstruction. Wait approxi-
mately 15 seconds for the motor to cool down
before turning back on. brush will function again
after allowing time to cool down.
Disposal of Batteries:
if your product is to be disposed of, the batteries
should be removed and disposed of properly.
1. ImpoRtant: make sure that the unit is
removed from the charging base.
2. Remove hand vac from unit.
3. squeeze the two battery release buttons to
release the battery pack. lift the battery pack
straight up and out of the hand vac.
4. Keep battery pack together – DO NOT sepa-
rate individual batteries. For specific disposal
instructions of batteries, please contact RbRC
(Rechargeable battery Recycling Corporation)
1-800-822-8837 or visit www.rbrc.com.
5. Discard remainder of product.
WaRnInG
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
WaRnInG
This product contains Nickel Metal Hydride (NiMH)
rechargeable batteries. According to Federal and State
regulations, removal and proper disposal of NiMH
batteries is required. For removal of
the batteries in your Lift-Off 2-in-1
Cyclonic see instructions on
this page.
TM
3.
8