1. DL manuals
  2. Bissell
  3. Vacuum Cleaner
  4. 1672
  5. User Manual

Bissell 1672 User Manual

Other manuals for 1672: User Manual
Manual is about: BISSELL Homecare, Inc user guide deep cleaner 1672 SERIES

Summary of 1672

  • Page 1

    Safety instructions product view assembly operations / special tools big green ® d e e p c l e a n e r u s e r ’ s g u i d e 1672 series 3 4 5-6 6-11 maintenance 12 troubleshooting 13 warranty 16 consumer services 15 replacement parts 14.

  • Page 2

    2 thanks for buying a bissell big green ® we’re glad you purchased a bissell big green ® multi-purpose deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your big green is well made, and we back it with a limited ...

  • Page 3: Save These Instructions

    3 important safety instructions ■ use only manufacturer’s recommended attachments ■ use only cleaning products formulated by bissell for use in this appliance. ■ keep openings free of dust, lint, hair, etc. ■ keep appliance on a level surface ■ turn off all controls before unplugging ■ unplug by gra...

  • Page 4: 13.

    4 13. 14. 15. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Ball ball cage motor filter measuring cup tank unit top power unit aluminum wands floor nozzle grip/trigger unit wand solution tube small wand clips vacuum flex hose hose with threaded connectors large vacuum flex hose clips tank siphon tube caste...

  • Page 5

    5 this user’s guide has been designed to help you get the most satisfaction from your bissell big green. You’ll find assembly and operating instructions, safety precautions and pre-cleaning tips, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assem-...

  • Page 6: 11.

    6 wand solution tube. Connect wand solution tube to spray tip on floor nozzle and to cap valve on grip/trigger unit. Small wand clips. Secure tube to wand with two small wand clips. Vacuum flex hose. Connect vacuum flex hose to grip/trigger unit and lock with latch buttons. Insert vacuum flex hose i...

  • Page 7

    7 vacuum carpet (see page 10, how to dry vacuum). Decide where to begin — and end — your job. Clean in 3’ x 4’ sections, starting in areas farthest from exit. Plan to leave a path open to empty collection tank and replenish filling cavity. Carpeting will dry in two to four hours, depending on carpet...

  • Page 8

    8 remove dry filter bag from ball cage. Remove concentrate measuring cup from filling cavity on side of tank unit. Pour two gallons of hot tap water (temperature should not exceed 120° f/48° c) into filling cavity until level reaches bottom of three vertical lines in tank unit. Shake bottle of bisse...

  • Page 9

    9 turn off pump/spray and vacuum/suction switches. Unplug from outlet. Remove tank siphon tube, flip down carrying handle and lift top power unit from tank unit. Carry tank unit to a toilet or sink to empty. With carrying handle in one hand, place other hand in gripping slot under filling cavity on ...

  • Page 10

    10 attach bare floor attachment to bottom of floor nozzle with rubber and brush strips facing out. Align front edges and snap together. Fill measuring lid twice with bissell floor care and empty into filling cavity. Pour two gallons of hot tap water into filling cavity. Water level should reach the ...

  • Page 11: 10.

    11 attach one of four dry vacuuming tools. Insert tank siphon tube in tank unit. Turn on vacuum/suction switch. Vacuum as usual. Empty collection tank when it is half full. See putting it away, page 12. Remove dry filter bag from ball cage. Place ball on raised area on bottom of tank unit. Position ...

  • Page 12: 10.

    12 putting it away rinse filling cavity with clean water. Leave about 1/2 gallon of clean water in filling cavity. Hold floor nozzle over bucket or sink. Turn on pump/spray switch, pull trigger for 30 seconds, and empty power unit. Empty filling cavity of excess water. Drain solution hoses. Empty an...

  • Page 13: Warning:

    Weak or no suction / motor suddenly runs louder / motor runs hot. Possible causes remedies vacuum is not operating check electrical plug vacuum/switch on? Call bissell consumer services (see page 15) collection tank unit is full empty collection tank air leak check all vacuum connections secure all ...

  • Page 14

    14 bissell replacement parts 26 14 13 25 5 6 17 21 9 10 11 12 7 22 4 16 3 18 19 2 20 8 15 27 1 28 29 23 24 item part no. Part name 1 210-4706 vacuum flex hose 2 555-9129 large vacuum flex hose clips (3) 3 555-9013 hose with threaded connectors 4 216-4181 grip/trigger unit 5 210-1188 dusting brush 6 ...

  • Page 15

    Bissell consumer services 15 for information about repairs or replacement parts, or questions about your warranty, call: bissell consumer services 1-800-237-7691 monday - friday 8 a.M. — 10 p.M. Et saturday 9 a.M. — 8 p.M. Et or write: bissell homecare, inc. Po box 3606 grand rapids, mi 49501 attn: ...

  • Page 16

    ©2003 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in usa part number 010-5859 rev 7/03 visit our website at: www.Bissell.Com this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional inst...