U s e r ’ s g u i d e 5288 series 3 safety instructions product view assembly operations maintenance and care troubleshooting consumer services replacement parts 4 5 6-7 7-8 9 10 11 warranty 12 ug603-6913_5288_606.Indd 1 ug603-6913_5288_606.Indd 1 6/20/06 9:12:18 am 6/20/06 9:12:18 am.
2 t hanks for buying a bissell hard floor cleaner 2 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 we’re glad you purchased a bissell flip-ease™. Everything we know about floor care went into the design and construction of this complete, convenient cleaning system. Your bissell flip-ease is w...
3 i mportant safety instructions w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 when using an electrical appliance, basic precautions should be observed, including the following: read all instructions before using your bissell flip-ease cordless hard floor cleaner. Warning - to reduce the ris...
4 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 spray trigger on/off switch dirty tank filter dirty tank latch clean tank charging port gentle clean™ microfiber pad solution hose spray tips (2) dry vacuum suction path p roduct view ug603-6913_5288_606.Indd 4 ug603-6913_5288_606.Indd 4 6/20/0...
5 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 assembling your new flip-ease is a 3 step process, requiring no tools. 1. Insert foot into body of unit until you hear a click. 2. Place the solution tube onto the spray connector. 3. Insert the handle into the body of the unit. Turn handle unt...
Dry vac 1. Attach the gentle clean™ microfiber pad onto the base of the unit. Begin by attaching the pad onto the velcro on one side of the unit, wrapping it under the foot and attaching on the other side tip: if the microfiber covers the vacuum suction path, the unit will not suction. 2. Turn the u...
7 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 switching from dry vac to wet mop 1. To change from dry vacuuming to wet cleaning simply flip the unit around! Wet mop 1. By squeezing the trigger, you will turn off the vacuum suction. 2. Water and solution will flow to the 2 spray tips on the...
B attery removal and disposal 1. Important: unplug charger. 2. Remove tanks (clean and dirty) and discard. 3. Remove screws (6) holding product housing together (see diagram). 4. Use screwdriver to score rating label on side of unit. 5. Separate housings and locate battery pack in bottom/ center of ...
T roubleshooting problems possible causes 1. No suction or unit will not turn on 1. Unit is not charged 2. No or low suction 2. Batteries are run down filter clogged dirty tank not properly installed microfiber pad covering suction path clogged suction path foot not properly installed 3 no spray 3. ...
For information about repairs or replacement parts, or questions about your warranty, call: bissell consumer services 1-800-237-7691 monday - friday 8 a.M. — 10 p.M. Est saturday 9 a.M. — 8 p.M. Est or write: bissell homecare, inc po box 3606 grand rapids mi 49501 attn: consumer services or visit th...
R eplacement parts - bissell flip-ease™ hard floor cleaner you may purchase parts from your retailer, by calling bissell consumer services or by visiting our website. Below is a list of common replacement parts*. While not all of these parts may have come with your specific model, they are available...
W arranty - bissell flip-ease™ this warranty gives you specific legal rights; and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e...
