Bissell 89Q9/18Z6 series User Manual - Aintenance and Care
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
M
aintenance and care
10
to maintain maximum cleaning
performance, the following
maintenance steps must be performed:
1. Empty the dirt container when the dirt
reaches the “Full” line.
2. Check the pre-motor filter at least once a
month and clean and replace as needed.
3. Check and replace the post-motor filter
as needed.
note: More frequent filter cleaning
may be necessary if you are
vacuuming new carpet, fine dust
or have allergy concerns.
Follow the instructions on the
following pages to perform these
simple maintenance steps.
empty dirt container
the dirt container needs to be emptied
when the dirt reaches the “Full” line on
the front of the container.
1. Unplug cleaner from electrical outlet.
2. Slide the Lock ‘n Seal lever to the
“Unlock” position.
3. Grasp handle and pull the dirt container
straight out to remove from vacuum.
4. Empty dirt into garbage container.
5. Put the dirt container back in the vacuum
and slide the lever to the “Lock” position.
the dirt container may be washed in
warm water with a mild detergent.
Make sure it is completely dry before
replacing.
note: emptying the dirt container after
every use will help prevent over filling
and ensure that the vacuum is ready
to go the next time you clean.
WaRning:
To reduce the risk of electric
shock, turn power switch OFF and
disconnect polarized plug from
electrical outlet before performing
maintenance or troubleshooting
checks.
Full Line
Lock
Position
Unlock
Position
2.
3.