Summary of AeroSwift™ Compact Vacuum
Page 1
Aero s wift ™ user guide 1009 series.
Page 2: Warning
Important safety instructions warning to reduce the risk of fire, electric shock, or injury: » always connect to a polarized outlet (one slot is wider than the other). Do not modify the polar- ized plug to fit a non-polarized outlet or extension cord. » do not leave vacuum cleaner when it is plugged...
Page 3
Www.Bissell.Com 800.237.7691 3 thanks for buying a bissell vacuum we’re glad you purchased a bissell vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your bissell vacuum is well made, and we back it with a limited two...
Page 4: Warning
1 quick release handle 2 turbobrush® tool 3 crevice tool 4 tank release button 5 stretch hose 6 carry handle 7 extension tool 8 power cord 9 bottom empty dirt bin 10 filter tray 11 height adjustment knob 12 quick release handle lever 13 combination dusting/ upholstery tool 14 hose wand base 15 power...
Page 5: Warning
Www.Bissell.Com 800.237.7691 5 assembly no tools required! Remove all protective plastic before assembly and operating. Attach quick release handle to base 1. Locate vacuum handle and remove the protective plastic overwrap. Note: the plastic wrap will easily slide off the handle by removing the turb...
Page 6: Floor Cleaning
Assembly febreze® foam filter option your vacuum comes with a standard foam filter (yellow) located in the lower filter tray. A separate febreze® foam filter (black) is also packed in the box protected by a plastic bag. Replace the standard yellow foam filter with the febreze® foam filter to elimina...
Page 7: 5 Height Adjustments
5 height adjustments turn the height adjustment dial on the front of the power foot to match your cleaning needs. The graphics around the dial indicate the appropriate setting for cleaning bare floor to high pile carpet. Turn the dial to the center for medium pile carpet. Note: if difficult to push,...
Page 8: Quick Tips
Www.Bissell.Com 800.237.7691 8 maintenance & care quick tips to maximize your cleaning performance and extend the life of your vacuum, it is important that you empty your dirt bin and clean your filters frequently. 1. Empty the dirt container when debris reaches the “full” line. For best performance...
Page 9: Warning
Www.Bissell.Com 800.237.7691 9 maintenance & care cleaning upper tank and inner cyclone after emptying the dirt bin, if there still is dirt and debris in the upper tank, you can easily clean the upper tank with these simple steps. 1. Before cleaning upper tank, empty all loose dirt and debris using ...
Page 10: Clearing Clogs
Maintenance & care clearing clogs low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor, check for clogs. 1. Turn power button off and unplug vacuum from electrical outlet. 2. Empty dirt bin and check the upper tank for build up or cl...
Page 11: Warning
Maintenance & care check rotating floor brush 1. Unplug the vacuum from electrical outlet. 2. Recline the handle into lowest position and turn the vacuum over so bottom side is facing up. Remove dirt bin to avoid any damage to the bin and easier access to the floor brush. 3. Remove the 3 screws in t...
Page 12: Replace Drive Belt
Www.Bissell.Com 800.237.7691 replace drive belt 1. Unplug the vacuum from electrical outlet. 2. With rotating brush removed (follow steps from check rotating brush section), grasp old drive belt and remove from motor pulley. If difficult to remove from pulley, use scissors to cut and remove belt. 3....
Page 13: Warning
Troubleshooting warning to reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. Problem possible causes remedies vacuum cleaner won’t turn on power cord not plugged in check electrical p...
Page 14
Replacement parts these items are available for your bissell aeroswift compact vacuum. Call 1-800-237-7691 or visit www.Bissell.Com www.Bissell.Com 800.237.7691 part # part name part # part name 160-0293 quick release handle 203-1429 turbobrush® tool 160-0294 turbobrush® tool handle clip 160-0296 ex...
Page 15
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer care by e-mail, telephone, or regular mail a...
Page 16: Call:
©2013 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in china part number 160-0238 rev 12/12 visit our website at: www.Bissell.Com for information about repairs or replacement parts, or questions about your warranty: registering is quick, easy and offers you benefits over ...