Bissell BigGreen User Manual - Attention:
w w w. b i s s e l l c o m m e r c i a l . c o m 1 - 8 5 5 - 5 4 4 - 7 3 3 6
A
ssembly
5
1.
7a.
7b.
6
1. Locate hardware pack for handle assem-
bly. Enclosed are two nut and bolts for the
handle, as well as upper (larger) and lower
(smaller) plastic cord hooks. An extra drive
belt is also included.
2. Connect lower handle to the base of
the unit. The thinner end should point
upwards, toward the top of vacuum.
Connect upper handle to lower handle
by sliding into each other. Upper handle
should curve towards the back of the unit.
Insert nuts and bolts and tighten.
3. Thread nut and bolt through hole in upper
and lower handle. Screw together nut and
bolt by hand, then tighten with screwdriver.
4. Take lower cord hook with vacuum facing
frontwards and snap into slot on lower
handle with hook facing down.
5. Take upper cord hook and place cord with
spring retainer into slot and snap in.
6. Wrap cord around cord clips.
7. To attach the shake-out bag to the vacuum,
find hook on the bottom of the bag and
hook it to the back of the vacuum base.
(See image) Align latch with the back of the
vacuum and bring the collar forward. Turn
latch so that bag locks onto rivet.
8. Attach spring from top of the shake-out bag
to the bag clip on upper cord wrap.
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition.
4.
ww
w.
bi
ss
el
lc
om
me
rc
ia
l.
co
m
1-
85
5-
54
4-
73
36
A
ssemblage
5
1.
7a.
7b.
6
1.
Repérez l'emballage contenant la
quincaillerie destinée à l'assemblage du
manche. L'emballage contient deux écrous
et boulons pour l'assemblage du manche,
ainsi que les crochets de range-cordon
supérieur (plus grand) et inférieur (plus petit)
en plastique. Une courroie de transmission
de rechange est également comprise.
2. Fixez le manche inférieur à la base de
l'appareil. L'extrémité plus mince devrait
pointer vers le haut, orientée vers le haut
de l'aspirateur. Fixez le manche supérieur
au manche inférieur en les insérant l'un
dans l'autre. Le manche supérieur devrait
se recourber vers l'arrière de l'appareil.
Insérez les écrous et les boulons, puis
serrez-les.
3. Faites passer l'écrou et le boulon dans
le trou du manche supérieur et inférieur.
Vissez à la main l'écrou et le boulon, puis
serrez-les à l'aide d'un tournevis.
4.
En dirigeant l'aspirateur vers l'avant, prenez
le crochet de range-cordon inférieur et
logez-le dans la fente située sur le manche
inférieur, en vous assurant d'orienter le
crochet vers le bas.
5.
Prenez le crochet de range-cordon
supérieur et placez le cordon avec cale-
ressort dans la fente et enclenchez-le.
6.
Enroulez le cordon d'alimentation autour
des crochets.
7.
Pour fixer le sac à poussière Shake-Out à
l'aspirateur, repérez le crochet au bas du
sac et accrochez-le à l'arrière de la base
de l'aspirateur. (Consultez l'image.) Alignez
le verrou avec l'arrière de l'aspirateur et
tirez sur le collier. T
ournez le verrou de
manière à fixer le sac au rivet.
8.
Attachez le ressort situé au-dessus du sac à
poussière Shake-Out au crochet du sac sur
le range-cordon supérieur.
ATTENTION
:
Certains tapis berbères ont tendance à
former des peluches au fur et à mesure
qu’ils s’usent. Le passage répété d’un
aspirateur ordinaire ou d’un appareil de
nettoyage en profondeur sur la même
surface peut aggraver ce phénomène.
4.