Bissell BigGreen User Manual - Warning:
w w w. b i s s e l l c o m m e r c i a l . c o m 1 - 8 5 5 - 5 4 4 - 7 3 3 6
7
M
aintenance and care
NOTE: Disconnect vacuum from
electrical outlet before attempting
to service it any manner.
Removing and
Emptying Shake-out Bag
1. Unclip the spring at the top of the vacuum
bag from the upper cord wrap.
2. Unlatch the bottom of the bag from the
base of the vacuum.
3. Remove the silver clasp and spring by
sliding it off the top of the bag.
4. Empty the contents of the bag.
5. Attach bag back onto vacuum by finding
hook on the bottom of the bag and hooking
it to the back of the vacuum base. Align
latch with the back of the vacuum and bring
the collar forward. Turn latch so that bag
locks onto rivet.
6. Place the metal plate back onto the bottom of
the vacuum and lock into place.
NOTE: Very fine powders and
substances may clog the cloth
bag. Please remember to empty
bag often so that vacuum cleaner
can efficiently operate.
1. Turn vacuum off and unplug from the outlet.
2. Turn the adjustment knob on the foot of the
vacuum to the desired setting.
3. Turn vacuum ON and begin to vacuum.
If the vacuum is too hard to push, unplug
from outlet again and adjust to the next
setting until easy to use.
WARNING:
To reduce the risk of fire, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
To Adjust the Carpet Height Setting
5a.
5b.
ww
w.
bi
ss
el
lc
om
me
rc
ia
l.
co
m
1-
85
5-
54
4-
73
36
7
E
ntretien et soin de l’appareil
REMARQUE : Débranchez
l'aspirateur de la prise de courant
avant de procéder à tout type
d'entretien.
Retrait et vidange du sac
à poussière Shake-Out
1. Dégagez le ressor
t au dessus du sac de
l'aspirateur du range-cordon supérieur.
2.
Décrochez le bas du sac de la
base de l'aspirateur.
3.
Retirez le fermoir argenté et le ressor
t en
le faisant glisser de la partie supérieure du
sac.
4.
Videz le sac de son contenu.
5.
Réinstallez le sac sur l'aspirateur en
repérant le crochet situé au bas du sac et
en l'accrochant à l'arrière de la base de
l'aspirateur. Alignez le verrou avec l'arrière
de l'aspirateur et tirez sur le collier. T
ournez
le verrou de manière à fixer le sac au rivet.
6. Replacez la plaque de métal sur la par
tie
inférieure de l'a
spi
rat
eur
et verrouillez-la
en place.
REMARQUE : Les poudres et les
substances très fines peuvent
obstruer le sac de toile. N'oubliez
pas de vider le sac fréquemment
afin d'assurer le fonctionnement
efficace de l'aspirateur.
1.
Éteignez l'aspirateur et débranchez-le de la
prise de courant.
2.
Utilisez le sélecteur de réglage situé sur le
pied de l’aspirateur pour choisir le réglage
souhaité.
3.
Allumez l'aspirateur et commencez à
l'utiliser. Si l'aspirateur est trop difficile
à pousser, débranchez-le de la prise de
courant et positionnez-le sur le réglage
suivant, et ainsi de suite, jusqu'à ce qu'il
soit facile à manœuvrer.
AVERTISSEMENT
:
Afin de réduire les risques de choc
électrique, éteignez l’alimentation
et débranchez la fiche de la prise
électrique avant de procéder aux
vérifications d’entretien ou de
diagnostic d’une panne.
Pour ajuster le réglage
de la hauteur au tapis
5a.
5b.