Bissell SPOTBOT 33N8 SERIES User Manual - page 7
www.BISSELL.com
7
Filling Your Clean Water Tank:
Portable Machine Formula (2X Concentrated)
Pour in more power with BISSELL Boosts
• Fill tank with water and 2X formula (Step 3 above).
• Add 1 ounce of any BISSELL Boost.
1
To fill the clean water/solution tank,
remove the clean water tank by lifting it
straight up and then away from the unit.
1) Add hot tap water to water fill line.
2) Add formula by following the indicated
“formula” fill line on your clean tank
Unscrew the black cap at the bottom of
the clean water tank.
Twist the cap back into place and set tank
back on unit.
4
2
3
1
2
A few notes about filling the clean water tank:
• Fill with hot (140°F/60°C MAX) tap water and add the
appropriate BISSELL solution.
• Fill with formula to the fill line as indicated.
DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE.