Bissell SPOTBOT 33N8 SERIES User Manual - Hands-Free Cleaning
www.BISSELL.com
9
Hands-Free Cleaning
Important! Please check manufacturer’s tag before cleaning area rugs for any
specialized cleaning instructions. Not for use on silk or delicate area rugs.
Getting Started
2
1
Select which cleaning cycle (
Quick Clean
or
Deep Clean) you would like
to use. SpotBot® will begin spraying,
brushing and suctioning the soiled area,
in a pre-programmed cycle.
Pick up the unit and check the area that
was cleaned.
If you use BISSELL Oxy Boost, it will
continue to work for the next six to eight
hours, cleaning your spots and stains all
the way to the backing of the carpet.
Place the unit directly over the spot or
stain, making sure the stain is in the center
of the cleaning area.
When the cleaning cycle you have
selected is complete, the Done light will
illuminate and the machine will sound a
series of “beeps”. Press the
STOP button
to turn the machine off. The machine will
not beep when turned off
3
4
Before using, test a small
inconspicuous area for
colorfastness.
Select “Hose/Tool” and follow
manual cleaning instructions on
page 10 to test.
2
1
NOTICE: To prevent damage to Berber carpets, avoid repeated cleaning cycles in
the same area.