Bissell Vac & Steam 1132 Series Troubleshooting Manual - Touch (Includes Mop Head)
K. Benedict 5/28/2014 C:\Users\vanwetjg\Documents\5 - Trouble Shooting
Guides\Troubleshooting 1132 Vac & Steam.doc
7
Yellow ring on vinyl or linoleum
Undiluted white vinegar should remove the yellow from linoleum or vinyl. Use directly
on the ring…
DO NOT USE VINEGAR OR ANY OTHER SOLUTION OTHER THAN
WATER OR BISSELL STEAM MOP DEMINERALIZED SCENTED WATERS IN THE
TANK.
Hot to touch. Unit below the dirt cup is quite warm to the
touch (includes mop head)
1) The lower area of the unit under the dirt cup will become warm to the touch
after it has been used or has been sitting on for a period of time. This is normal
for it to feel warm to the touch.
2) Do not put hands down near the mop head while steaming. When finished
steaming allow foot to cool for a few minutes before removing the pad.
Filter is difficult, or impossible to remove
If the filter is hard to remove, take out the hose and th
en use the “grips” on the filter to
pull out. Start by pulling the lower hose out first, then turn the upper hose to the left until
it pulls out. Then grasp the filter on each side and pull straight out. The “dummy” filter
has a slight grip. The white filter has two grips, one on each side.
1.
2.