BulbAmerica iLED-24 User Manual - page 12
Menu Function
Menu
Display
Function
Values
ADDR
Set the DMX address of the unit. Set between 1 and 512. Each unit is
4 DMX channels
Shnd
Sound controlled built in
programs
A0 to A9
SVAL
Speed/Fade Settings/
single
color selection
for Shnd
programs
1 to 8
blnd
Control on/off function of the light n bo Unit is blacked out (off)
y bo Unit is on and pre-programs
can be used
LED
Setting for the LED display to be
on or off when not being used
on
LED display is always on
OFF The LED display will turn off
after 10 seconds. Press the
[MENU] button to illuminate
the LED display
Fadj
In this mode, pressing the
[ENTER] button will change the
color and hold. Press [Enter]
again the next color will output
test
In this mode, a range of colors
will cycle through when [ENTER]
is pressed.
Fhrs
Display the number of
operational hours of the unit by
pressing [ENTER]
rSet
Reset the unit by pressing
[ENTER]
Operation
Standalone & Master/Slave Operation
When multiple units are linked together via 3pin XLR cables (sold separately), the first
unit in the chain will act as the Master and will send data (DMX-512) to the other units
(Slaves).
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic sound activated synchronized light show.
The uint is normally without sound activated function. If
the
client request the unit
with sound activated function and it is only used in the indoor case ,we may
configure the function.
iLED LED PARCans have built-in programs that are accessed via [Shnd] Menu.
12
ORDER DIRECTLY TODAY AT:
www.BulbAmerica.com
or CALL TOLL FREE 888-505-2111