Bullard TacPole User Manual
TacPole
User Manual
www.bullard.com
TacPole
Extendable Accessory
The Bullard TacPole, designed for use with Bullard TacSight, T3 and T4 thermal
imagers, is an extendable pole allowing for enhanced visual scene assessment
into otherwise inaccessible or dangerous areas. The TacPole can easily see into
attics, above suspended ceilings, around corners and down into basements or
other subterranean areas. The TacPole comes equipped with a quick release
mounting bracket and viewing display. TacPole can be equipped with an optional
transmitter as well.
NOTE:
To ensure that we are able to reach you with any product or software
updates, please fill out the warranty card enclosed with your Bullard
TacSight, T3 and T4 Series Thermal Imagers.
Read all instructions and warnings before using this product.
Contact with energized electrical lines may create a risk of electrical shock
to the user. Keep the product away from energized electrical lines and when
holding the TacPole, use the non-conducting safety grips provided.
Your TacPole is like any other tool. It must be used properly and safely. All
users should be trained on the proper and safe use of thermal imaging
prior to using the TacPole. This is especially important for users who may
use the TacSight, T3 and T4 Series Thermal Imagers in hazardous or IDLH
(immediately dangerous to life and health) environments.
Failure to follow this information could result in death or serious injury.
WARNING