1. DL manuals
  2. Bullet Barbecue
  3. Grill
  4. 0-4078
  5. Assembly & Operating Instructions

Bullet Barbecue 0-4078 Assembly & Operating Instructions

Manual is about: Built-in Gas Grill

Summary of 0-4078

  • Page 1

    By bull manufacturing rialto , california 92376 _________________________________________________________________________________________________________ assembly & operating instructions model # 48038 4 burner stainless steel, rotisserie, built-in, l.P. (propane) model # 48039 burner stainless stee...

  • Page 2: Safety Instructions

    Safety instructions read carefully before assembling and operating your gas grill this gas grill must be installed in accordance with local codes or, if in an area without local codes, with the latest edition of the national fuel gas code ansi z223.1. In canada, installation must conform to the stan...

  • Page 3: Natural Gas Safety

    Natural gas safety your natural gas grill is designed to operate on natural gas only, at a pressure of 4” water column (w.C.) regulated at the natural gas regulator attached at the back of the grill. Check with your gas utility for local gas pressure and with your local municipality for building cod...

  • Page 4: Installation Instructions

    Installation instructions please read these instructions before installing your gas grill yourbuilt-in gas grill comes to you fully assembled. We strongly recommend professional installation and hookup of the gas bbq grill. These instructions will provide you with the measurements necessary for you ...

  • Page 5

    Outdoors natural gas bbq installation specifications note: vents must be provided for combustion air on both sides of built-in cabinet. When choosing a location for your gas grill keep in mind that it should never be located under any overhead combustible construction. The sides and back of the gril...

  • Page 6

    Outdoors propane gas bbq installation specifications note: vents must be provided for combustion air on both sides of built-in cabinet. When choosing a location for your gas grill keep in mind that it should never be located under any overhead combustible construction. The sides and back of the gril...

  • Page 7

    Burner cleaning 1. Remove burner from the grill bowl (see drawing on right). Bend a stiff wire (a light-weight coat hanger works well) into a small hook as shown below. Run the hook through each burner tube and burner several times. 2. Use a narrow bottlebrush with a flexible handle. Run the hook th...

  • Page 8

    Important: before first use wash flame tamers, cooking grids, and warming rack with warm, soapy water. Rinse and dry thoroughly. Season metal surfaces with cooking oil occasionally. (after cooking is completed, turn grill to high setting for no more than five minutes to burn off excess grease or foo...

  • Page 9

    1. Become familiar with safety guidelines at front of manual. Do not smoke while lighting grill or checking gas supply connectionsi 2.If yourgrill fuel source is a lp gas cylinder, check to see that cylinder is filled. 3. Check the end of each burner tube to make sure it is properly located over eac...

  • Page 10

    Caution: do not leave grill unattended. Preheating: it is necessary to preheat the grill for a short time before cooking certain foods, depending on the type of food and the cooking temperature. Food that requires a high cooking temperature needs preheat for five minutes; food that requires a lower ...

  • Page 11: Cleaning & Maintenance

    To 4½ hrs to cook depending on the size and type of meat being cooked. You can have rotisserie cooking with indirect heat as shown or with an infrared rotisserie burner. For successful rotisserie, the meat should be centered and balanced as evenly as possible on the spit rod to avoid overworking the...

  • Page 12: Troubleshooting

    Washing the flame tamer after every use is not necessary but periodically it is suggested you wash the tamer in a soap and warm water solution. Use a wire brush to remove stubborn burned on cooking residue. Dry the flame tamer thoroughly before you reinstall it in the cooking bowl. Cleaning the burn...

  • Page 13

    B. Obstruction in gas line correction: remove fuel line from grill. Do not smokei open gas supply for one second to blow any obstruction from fuel line. Close off gas supply at source and reconnect fuel line to grill. C. Plugged orifice correction: remove cooking grids, flame tamers, grease draining...

  • Page 14: Illustrated Parts List

    Ref# description standard infrared 1 lid-front 1 1 2 lid-rear 1 1 2a cover-rear lid ~ 1 3 assembly 1 1 4 control panel 1 1 5 grease tray 1 1 6 grease tray handle 1 1 7 heat shield 3 3 8 cast- burner 4 ~ 8a stainless steel burner ~ 4 9 flame tamer 4 4 10 cooking grid 4 4 11 warming rack 1 1 12 lid ha...

  • Page 16: Limited Warranty

    By bull manufacturing rialto , california 92376 limited warranty bull outdoor products, inc. Warrants to the original purchaser at the original site of delivery with proof of purchase of each outdoor gas grill that when subject to normal residential use, it is free from defects in workmanship and ma...