Bullet Barbecue 0-4078 Assembly & Operating Instructions - Illustrated Parts List
REF#
DESCRIPTION STANDARD
INFRARED
1
LID-FRONT
1 1
2
LID-REAR
1 1
2A
COVER-REAR LID
~ 1
3
ASSEMBLY
1 1
4
CONTROL PANEL
1 1
5
GREASE TRAY
1 1
6
GREASE TRAY HANDLE
1 1
7
HEAT SHIELD
3 3
8
CAST- BURNER
4 ~
8A
STAINLESS STEEL BURNER
~ 4
9
FLAME TAMER
4 4
10
COOKING GRID
4 4
11
WARMING RACK
1 1
12
LID HANDLE
1 1
13
WARMING RACK SUPPORT
2 2
14
FLAME TAMER SUPPORT
14 14
15
BEZEL-MAIN BURNER
4 4
15A
BEZEL- BACK BURNER
~ 1
16
KNOB-MAIN BURNER
4 4
16A
KNOB-BACK BURNER
~ 1
17
TEMPERATURE GAUGE
1 1
18
GAS VALVE-MAIN BURNER
4 4
18A
GAS VALVE-BACK BURNER
~ 1
19
REGULATOR-NATURAL GAS MODEL ONLY
1 1
19A
REGULATOR-LP MODEL ONLY
1 1
20
MANIFOLD
1 1
20A
STAINLESS FLEX TUBE
1 1
21
INFRARED ROTISSERIE BURNER
~ 1
22
MOTOR BRACKET
1 1
23
BACK PANEL
~ 1
24
STAINLESS FLEX TUBE
~ 1
25
NOZZLE-BACK BURNER
~ 1
26
IGNITION WIRE FOR BACK BURNER
~ 1
27
ELECTRODE
~ 1
HOW TO ORDER REPLACEMENT PARTS
Please refer to the parts list on this page.
To make sure you obtain the correct replacement parts for your gas grill, the following information is required to assure getting the correct part.
1. Gas grill model number (see data sticker on grill) and type of gas hook up.
2. Reference number of replacement part needed.
3. Description of replacement part needed
4. Quantity of parts needed.
IMPORTANT: Use only factory authorized parts. The use of any part that is not factory authorized can be dangerous. This will also void your warranty.
IMPORTANT: Keep this assembly and operating instruction manual for referral and forreplacement parts ordering.
CAUTION: Gas valves are preset at the factory. If you wish to convert at some later date, be sure to contact your gas supplier or grill dealer before making the
conversion.
CAUTION: A different gas valve must be installed when converting from one type of gas to another. You will also need a data plate indicating what type of gas the grill
uses.
14