BulletScan S300 Quick Installation Manual - page 3
iVina BulletScan S300 Quick Install Guide
Rev. 5 Aug 2010
3
Select "Easy Install" from the menu to have all of the standard
software installed automatically for you.
If you're using Windows Vista with User Access Control enabled,
you may see a window pop up. Click the "Allow" option.
When your computer finishes installing the software and driver,
you can then connect and power on your scanner (see next
page).
If the installation menu doesn't open automatically, you'll need to
open "My Computer" (on Windows XP) or "Computer" (on
Windows Vista/7). From there double-click the "ScannerDrivers"
icon and the menu should open.
If you do not have a drive that can read CD-ROM discs, the driver
for your scanner is available at www.bulletscan.com
The additional software provided with your scanner is only
licensed for distribution via CD, and is only licensed for the
computer that the BulletScan scanner is attached to.