BulletScan S300 Quick Installation Manual - page 4
4
Unpacking the Scanner:
Attention! - Your scanner is secured for shipping with Blue or
Bright Orange Packing Tape. Only remove the Colored Tape, the
foam and bubble wrap it secures, and loose cushioning foam.
Removing the clear plastic guide strips or the white reference
background will void your warranty. See the BulletScan website
under "setup" for details or questions.
After you have removed the
external tape, press the
release button on the
right-hand side to undock
the scanner. Lift the Scan
Module up and forward to
undock it. Remove the
protective foam from
between the Scan Module
and the Dock.
Then, on the left hand side of the Scan Module pull the release
catch. The Scan Module should open up and you can remove the
foam from the middle.
Release Button
Release Catch