BullFrog 2002 Spas Owner's Manual - page 33
Page 33
Bullfrog Spas Owner’s Manual
6.Take the entire Ozone Sterilizer to your authorized
Bullfrog Portable Spa Dealer. Your Ozone Sterilizer will
be checked to verify that it is defective. If defective,
then replace the entire Ozone Sterilizer with a new one.
Note: If your Ozone Sterilizer is found to be working
properly, then you may have a problem with your spa's
Control Center or Control Pad. Consult your dealer and
request a service call.
7. Reinstall the Ozone Sterilizer by reversing the above
procedure.
SPA SHELL CARE
Your Bullfrog spa surface is durable and easy to clean:
Quarite Plus® Spa Surface:
For normal cleaning, use Ivory® Liquid dishwashing
detergent or its equivalent. For stubborn stains, use
Spic & Span® in powder form or its equivalent. To apply
these cleaners, use a soft, damp cloth or sponge. Rinse
well and dry with a clean cloth.
Centrex® Spa Surface:
For normal cleaning, use a mild soap solution (5%Ivory®
Flakes in water), a mild detergent solution (3% Tide® in
water), Household Ammonia, or Mineral Spirits. For
surface mars, use Baking Soda. To apply these cleaners,
use a soft, damp cloth or sponge. Rinse well and dry
with a clean cloth.
General Cleaning:
With normal use of your spa, oils, lotions and
hairsprays will build up on the surface of the water,
sometimes leaving a scum line around the perimeter of
your spa shell. This scum line can easily be removed
with a spa SURFACE CLEANER or its equivalent.
To remove grease, oil, paint and ink stains, use 25%
isopropyl (rubbing) alcohol in water.
For hard water stains consult your authorized Bullfrog
Portable Spa Dealer for acceptable cleaning agents.
To remove light scratches and/or to protect your spa’s
shell, see your Bullfrog Dealer for an acceptable spa
wax.
Note 1: Never allow your spa surface to come in
contact with acetone (nail polish remover), nail polish,
dry cleaning solution, lacquer thinners, gasoline, pine
oil, abrasive cleaners, or any other harsh chemical.
These chemicals can damage your spa shell and void
your warranty.
Note 2: Avoid using cleaning agents that will leave
suds in your spa water.
Note 3: Be sure to clean the JetPaks and the JetPods
(the area behind the JetPaks) approximately twice each
year.