Bully Dog 40505 Installation Manual - Change Vehicle
13
Change Vehicle
change Vehicle
Once Selected the Change Vehicle Option will display the Vehicle Selection Screen. This feature should
be used if:
1. The wrong vehicle has been selected.
2. If the Triple Dog E3 is being transferred to a
new vehicle.
The Change Vehicle Option will only appear in the
Main Menu if the Triple Dog E3 is not installed on
a vehicle.
on-the-fly-select
This menu Item only appears after a download is completed on a vehicle. It is also the first screen to
be displayed after a download is completed. Further, after a download is completed, the ON-THE-FLY
select menu will be displayed every time the Triple Dog E3 is plugged into the OBD ll port.
While in the ON-THE-FLY select screen use the up
and down arrow buttons to navigate between
the menu items, press Y to select the power
level desired. The Triple Dog E3 contains two
options: the first is the Tow/Economy tune the
second is the Stock Power (same power level as
stock) and the third menu item if selected will
return to the main menu.
Note: Selecting the Stock Power tune, will not re-
turn the vehicle to stock, there is still a download
entered into the vehicle. To return the vehicle to
stock, navigate back to the main menu and select
the Install Download option.