C*Pix SDC2000 User Manual - page 8
Changing Capture Modes
Continuous Mode
1. Press Mode button until
is shown on the LCD panel
2. Hold down the Shutter button to take images continuously until the frame count goes down to 00.
NOTE: In Continuous mode, 6 images will be taken in one second.
Self-Timer
1. Press Mode button until
appears on the LCD panel
2. Press Shutter button. A beep will sound and the LED will blink for 10 seconds before a photo is
taken.
Deleting Images
Deleting All Images
1. Press Mode button until
is shown in the LCD panel.
2. Press Shutter button and
will flash in the LCD panel. While
is blinking, press Shutter
button again. You will hear a beep and all images will be cleared.
NOTE: If Shutter button is not pressed while
is blinking, the frame count will return on the
LCD panel in 5 seconds.
Deleting Last Image Taken
1. Press Mode button until
is shown on the LCD panel
2. Press Shutter button and the last taken photo will be deleted
Connecting digital camera to PC
Install Arcsoft programs and camera drivers in Windows 98SE/Me/2000/XP
NOTE: The graphics shown are based on the user interface in Windows 98SE
•
NOTE: If you are running Windows 98 First Edition, Select number 3. Download DirectX 8.0 on
the Installation CD welcome screen to download a copy of DirectX 8.0 from Windows website
for use with your camera. Please be sure internet connection has been made.
1. Place the Installation CD into the CD-ROM drive, The CD-ROM will autorun.
2. Select number 1 on the setup screen to install the Arcsoft software
3. Change Destination Folder if necessary
4. Select components to install
5. Change program folder name if necessary
6. Click Finish button to complete Setup
Install camera drivers:
1. Select number 2 on the setup screen to install the camera drivers.
2. Click Finish button to complete Setup and restart your computer
3.
After your computer is restarted, connect to the camera and computer with the USB cable. The
computer will recognize the camera.
Note:
•
The installed camera drivers may conflict other USB devices in your computer system.
•
NOTE: If you are running Windows 98 First Edition, Select number 3. Download DirectX 8.0 on
the Installation CD setup screen to download a copy of DirectX 8.0 from Windows website
for use with your camera. You must be connected to the internet to access this link.
Connecting the Camera to Your PC
1.
Take some images with your digital camera
2.
Plug the enclosed USB cable into the camera's USB port and then into your computer's USB
port.
Important: Do not connect camera to PC before drivers are installed.
Downloading Images
Downloading photos using PhotoStudio
NOTE: The graphics shown are based on the user interface in Windows 98SE
1. Click Start > Programs> SDC2000 Digital Camera Suite > PhotoStudio 2000 to open the Arcsoft
PhotoStudio program
2. Click File > Select Source from the pull-down menu and select "My DSC"
3. Click File > Acquire from the pull-down menu to open the following dialog panel. Click Download
photos icon.
7