C. Crane CC Vector Quick Start Setup Manual

Quick Start Setup Guide

NOTE: Please follow the Assembly Guide and Mounting Instructions for

            your Supplied USB Antenna.

To Configure with a Ethernet Cable:

Although the CC Vector can be set up from a tablet or a smartphone, it may be

   easier to use a computer using the included 18” Ethernet cable.

  Connect the Ethernet cable to your computer’s Ethernet port and to either of the

  CC Vector’s Ethernet ports on the back of the device. 

Configure Wirelessly (most popular way):

1. From your computer, tablet, smartphone or

    WiFi device, go to the WiFi Settings/Connections

    and connect to the 

WiFi Name

 listed

    on the sticker underneath the CC Vector.

2. Enter the 

WiFi Password

 when prompted.

1

WiFi Name

WiFi Password

NOTE:

Please do not skip any steps.

START HERE:

 Attach Repeater’s 

 Antenna

Plug AC Power 

into Wall

Connect Power

Rev 14_4/2018

CC Vector

 WiFi Repeater

OR

B

1

A

A

B

2

Leave this one

unplugged

Connect other end of the USB cable to the USB Antenna.

Plug USB into

the CC Vector