C. Crane CC Vector Quick Start Setup Manual - page 2
2
After confirming you have completed Step “B”, open the Internet Browser screen on your
device and enter
192.168.8.1 into the Address Bar. Press “Enter” on your keyboard.
NOTE:
At this point you are connected to the CC Vector but your browser will likely
tell you that you are not connected to the internet. This is normal because the CC Vector
is not yet setup. Continue with the setup.
NOTE:
For best performance, your signal should be higher than 50%. For a better signal,
try adjusting the orientation and placement of the USB antenna - then click “Rescan” to
see if the signal is higher.
NOTE:
If network in Step “D” does not require a password, then you will not get this
screen. Proceed to Step “F”.
NOTE:
If wireless password includes special characters please see #2 in the
“Troubleshooting and Tips” section on Page 3.
..then click
”Next”
and go to
Step “F”
Enter Wireless
Password for
Network
in Step “D”
For
advanced
users only
..then click
”Select”
Click the
dot next to
the WiFi
network that
you want
to repeat..
C
D
E