C-Dax C-DIT300 Owner's Manual - page 5
5
INTRODUCTION
C-Dax thanks you for your purchase of an advanced spreader from C-Dax Ltd. C-Dax Ltd is committed to
providing you, the farmer, with quality applicating systems.
DESCRIPTION
The C-Dax C-DIT300 is a ground-driven spreader designed for application of pelleted fertilisers. It can also be
used for application of other products such as grass seed and magnesium oxide. The uniquely designed 300-
litre translucent non-corrosive polyethylene hopper is specially profiled for good product flow and ease of
filling. The convenient flexible polypropylene cover is easy to remove, install and store if not required. A high-
quality stainless steel agitator and shutter ensures even flow of product to the spinner. A unique spinner
design ensures wide, even spread of product over 180 degrees (Urea). The drive train uses high quality steel
and a double sealed self-aligning bearing and heavy-duty gearbox for maximum durability. While seated, the
operator has access to the control handle. This handle allows disengagement and engagement of the clutch
and setting of product feed rate all in one motion. Also standard are mudguards, swivel tow-hitch and a fully
shrouded polyethylene front deflector to further protect the operator from product being thrown off the spinner.
Specifications: All Models Unless Stated
(Specifications subject to change without notice)
Dry Weight
75 Kg
Dimensions
W1430mm, H1200mm, L1700mm
W1450mm (Wide wheel models)
Capacity
300 litre (250Kg Urea)
Drive
Ground driven (single wheel)
Wheels
18x950x8 Chunky turf tyres
Tyre Pressure
12 PSI
Clutch
Lever operated mechanical clutch
Control
Adjustable stainless steel slide with index handle
Agitator
Mechanical arm, stainless steel
Spinner
Galvanised steel with three-position adjustable vanes
Hopper
Non-corrosive polyethylene, ergonomically designed for ease of filling and inspection
Hopper Cover
Lightweight polypropylene fabric
Frame
Galvanised steel
Gearbox
Heavy duty with double sealed bearings
Gearbox oil
400ml SAE30
Axle Bearings
Sealed ball races
Clutch bearing
Self-lubricating Vesconite bearing
Axle grease
General Purpose
Application Rate
140Kg per hectare @ 10 kph (nominal, Urea)
Spread width
18M (nominal, Urea @ 15 Kph)
Towing speed
15 Kph (Maximum recommended)
NZ
UK EXPORT
Order Information
Standard C-DIT300model
P/N
3003
3010