C.E.C. CD5300 Owner's Manual

Summary of CD5300

  • Page 1

    Owner’s m manual.

  • Page 2

    Introduction thank you for purchasing cd5300! Please read the manual carefully in order to use your cd5300 in the best possible way. Cd5300 is a high end sounding cd player, with several unique or special technical features, an outstanding digi- tal to analog converter and analog output stage withou...

  • Page 3

    Important safety instructions caution: to reduce the risk of electric shock, do not open the unit. No user servicable parts inside: refer servicing to qualified service personnel. Precautions for use • check that the operating voltage of your unit is within the range of your local power. Cd5300 requ...

  • Page 4

    X power - power switch. Turns the unit on / off. Y phones - 6.3mm standard headphone terminal and headphone volume control. The outputs on the backside of the unit are not affected by the volume control. Z dac options - the leds indicate the options of the dac circuit, selected by the remote control...

  • Page 5

    Analog output x balanced - balanced analog xlr output. Pinning: 1=ground, 2=hot, 3=cold. Y rca - unbalanced standard analog output for connecting an amplifier. Balanced xlr connections are first choice! Digital output z toslink - optical digital output for toslink optical fibre connection [ coaxial ...

  • Page 6

    Remote control • avoid exposure of the remote sensor to direct sunlight or other light sources as such exposure can cause malfunction. • when operating the remote control unit, pay attention to a free way to the cd5300, otherwise control may not be possible. • when operating the remote control unit,...

  • Page 7

    Programmed playback 1. In stop mode, press memo. The player enters the program mode. The memory indicator lights on the display. The track no. And step no. Indicators blink. 2. Press numeric buttons they are automatically stored in the program memo- ry order. Example to program tracks in the order 3...

  • Page 8

    Specifications • laser: 3 beam semiconductor laser • frequency response: 20 hz to 20 khz: +/- 0.3 db • output voltage rca: 2 v rms • output voltage xlr: 4 v rms • total harmonic distortion: 0.004 % at xlr output, 0.012 % at rca output • signal / noise: 113 db at xlr output, 106 db at rca output • ch...