C.E.C. CD5300 Owner's Manual - page 5
ANALOG OUTPUT
X
BALANCED
- Balanced analog XLR output. Pinning: 1=Ground, 2=Hot, 3=Cold.
Y
RCA
- Unbalanced standard analog output for connecting an amplifier.
Balanced XLR connections are first choice!
DIGITAL OUTPUT
Z
TOSLINK
- Optical digital output for Toslink optical fibre connection
[
COAXIAL
- Standard digital (SPDIF) output. The cable impedance should be 75 Ohm.
\
AES/EBU
- Balanced digital output according to the AES/EBU standard. The highest
quality link to connect CD5300 with other compatible digital audio device.
The cable impedance should be 110 Ohm.
Pinning: 1=Ground, 2=Hot, 3=Cold.
AC-POWER
]
AC-POWER
- AC Power connector, needs 3-pole cable including ground connector.
CD5300 handles all AC-Voltages from 100 to 240 Volt, 50 or 60 Hz.
ACOUSSTONE Bottom Panel and Spikes
•
CD5300’s bottom panel is made out of Acoustone for enhanced mechanical quietness.
•
For best results in discharging mechanical reso-
nances CD5300 uses Spikes. For safe transportation
the pointed Spike is replaced by a plastic part.
•
For best results replace the plastic part by the sup-
plied metal tip and place CD5300 on a flat surface.
•
For protecting the surface use the supplied washers.
XY
Z
[\
Rear Panel Functions
]
X