C&K Systems S802 Installation Manual - page 9
8
SOUNDER DURATION (sounder ring time)
3-2 (Range 3-20 minutes)
Enter 3-2. This has been preset to a factory default of 15 minutes. A new time
may be programmed by entering one key from the following table. Press * to
confirm the selection. The accept tone will sound.
Enter 1
3 minutes. Led 1 on.
Enter 2
4 minutes. Led 2 on.
Enter 3
5 minutes. Led 3 on.
Enter 4
10 minutes. Led 4 on.
Enter 5
15 minutes. Led 5 on. (default)
Enter 6
20 minutes. Led 6 on.
NIGHT SET / HOME SET EXIT TIME
3-3 (Range 0-90 seconds)
Enter 3-3. This has been preset to a factory default of 15 seconds. A new time
may be programmed by entering one key from the following table. Press * to
confirm the selection. The accept tone will sound.
Enter 0
0 Seconds. All LED's off ( Instant ).
Enter 1
10 Seconds. Led 1 on.
Enter 2
15 Seconds. Led 2 on. (default)
Enter 3
30 Seconds. Led 3 on.
Enter 4
45 Seconds. Led 4 on.
Enter 5
60 Seconds. Led 5 on.
Enter 6
90 Seconds. Led 6 on.
NOTE: The exit sounder volume can be altered by the control on the PCB marked
VOLUME or RV1. Please note, this will not apply to keypad bleepers.
Option
Option
Results from choosing option no.
Code
Description
0
1
2
3
4
5
6
3-0
Exit Time (secs)
10
15
30
45
60
90
3-1
Entry Time (secs)
10
15
30
45
60
90
3-2
Sounder Duration (mins)
3
4
5
10
15
20
3-3
Night / Home Exit (secs)
0
10
15
30
45
60
90
Examples
Change the FULL set exit time to 60 seconds
ENTER THIS
3-0
5
*
Description
Choose full set
Select 60 seconds
Confirm selection
Change the Sounder duration to 3 minutes
ENTER THIS
3-2
1
*
Description
Choose
sounder
Select 3 minutes
Confirm selection
Change the ENTRY time to 45 seconds
ENTER THIS
3-1
4
*
Description
Choose entry
Select 45 seconds
Confirm selection
SOUNDER
DURATION
NIGHT / HOME
SET EXIT TIMER
SUMMARY