User manual securit 800l+ control panel st800l+ uk security panels.
2 company profile c & k systems has been successfully making security products for over 20 years and leads the security industry throughout the world with many innovative and class-leading products. We pride ourselves with quality and cost effective products like this securit 800l+ control panel. C ...
3 1:0. Setting the system to arm the system enter your user code. The exit tone from any extension speakers start at a low volume level, as well as sound from the keypads. The speaker volume increases after 5 seconds. Any pulsed tones should return to a continuous tone once you have left the buildin...
4 3:0. Disarming the system enter the protected area by the authorised entry route. A single continuous tone is made from any extension speakers and from any remote keypads fitted. Proceed directly to the control panel or keypad and insert your user code whereby the system disarms. If the entry tone...
5 personal attack from remote keypad fire code change 5:0:1. Personal attack from remote keypad if your installer has programmed personal attack on the keypads, pressing and holding the * and # key together activates the alarm system as in 5:0. The only difference is that the tamper light illuminate...
6 8:0. Sounder tests it is advisable to check that the sounders are working correctly every week. To do this go to the panel or remote keypad and enter a user code, then press *, then 9. Each of the tests lasts for 5 seconds. All the lights on the control panel illuminate. Then the lights go out, an...
7 11:0 logs the control panel has the ability to look at the last 9 set and unset condi- tions of the panel, as well as the last alarm condition. This is useful if the panel has been reset and you need to find the zone that caused the alarm. Enter the four digit user code, and the buzzer emits a ste...
C & k systems is a registered trademark of c & k components, inc. Copyright 1999 c & k systems, inc. P/n 5-051-614-00 rev a please note: c & k systems is always endeavouring to improve quality and specification of all its products and may alter or amend this product and instructions without notice. ...
