C-KO CT Series Quick Start Manual - Page 6 Of 10
of
10
Page 6 of 10
Setting up the Time
While the HDD is formatting you can change the settings for the DVR setup,
first is the time and date. First press the ‘LOGIN’ button on the remote, and
then enter the password. (By default it is set to ‘111111’)
Once into the time set menu change the ‘TIME ZONE’ value to GMT. Make
sure you hit ‘SAVE’ at the bottom to save changes. By default the time zone is
set to GMT+8, this must be changed to allow for accurate time information.