C-KO CT Series Quick Start Manual - Page 9 Of 10
of
10
Page 9 of 10
Last setting on this page is only required if you plan on recording audio. All
you need to do is turn audio on, on the relevant channel/s.
Once all the required settings have been changed remember to hit save at
the bottom of the page.
Setting up the Triggers
The following alarm inputs need to be set up as per how they have been
wired. Highlight the box and press the + and – buttons on the remote. The
following is based on the wiring diagram:
IN2 – Set to LEFT
IN3 – Set to RIGHT
IN4 – Set to BACKOF