C-more Micro EA-MG6-BZ2 Hardware User Manual - 6–20
6–20
Chapter 6: PLC Communications
6
®
EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
Cables from AutomationDirect – Wiring Diagrams (cont’d)
Note: Only one C-more Micro-Graphic panel can be powered by an AutomationDirect PLC. If connecting
C-more Micro-Graphic panels to more than one port on and AutomationDirect PLC, the additional panel
must use an external power supply.
Direct Logic PLC RJ11 port: D3-340 Port 1 & 2
RS-232C (p/n OP-3CBL-1)
To PLC
RJ11 Port
1
1 = RXD
2 = TXD
3 = do not use
4 = Sig GND
2
4
RXD
TXD
GND
4
3
1
TXD
RXD
RJ11 4-pin
Phone Plug
(4P4C)
Wiring Diagram
Note: Use the above wiring diagram if you need to make your own cable. We recommend using 22 AWG shielded cable.
1 2 3 4
To C-more
Micro-Graphic
Serial Port1
1 = Sig GND
2 = not used
3 = RXD
4 = TXD
5 = +5 VDC
6 = Sig GND
1 2 3 4 5 6
RJ12 6-pin
Phone Plug
(6P6C)
DV-1000CBL
OP-3CBL-1
To C-more
Micro-Graphic
Serial Port1
DirectLogic DL405 PLC Port 0: DL-450 Port 0
RS-232C (p/n D4-1000CBL)
To DL405 PLC
Port 0
6
4
15
3
Wiring Diagram
3
2
1
14
1 2 3 4 5 6
RJ12 6-pin
Phone Plug
(6P6C)
1 = GND
2 = do not use
3 = RXD
4 = TXD
5 = +5 VDC
6 = GND
2
12
5
11
7
13
8
4
1
8 = YOM Sense
7 = CTS
6 = do not use
5 = do not use
4 = Online
3 = RXD (232C)
2 = TXD (232C)
1 = YOP Sense
15 = Logic GND
14 = Logic GND
13 = Logic GND
12 = do not use
11 = do not use
10 = do not use
9 = do not use
1
15
15-pin
D-sub
(male)
See PLC user manual
for pin out details.
GND
RXD
TXD
GND
YOP
CTS
YOM
GND
5V
TXD
RXD
GND
D4-1000CBL
Power Supplied to Panel through Cable from CLICK and Direct Logic PLC RJ12 port:
DL05, DL105, DL205, DL350, DL450, H2-WINPLC
RS-232C (p/n DV-1000CBL)
To PLC
RJ12 Port
To C-more
Micro-Graphic
Serial Port1
6
4
GND
TXD
1
3
GND
Wiring Diagram
3
RXD
2
+5 V
1 = Sig GND
2 = not used
3 = RXD
4 = TXD
5 = +5 VDC
6 = Sig GND
1 2 3 4 5 6
RJ12 6-pin
Phone Plug
(6P6C)
1
GND
6
GND
1 2 3 4 5 6
RJ12 6-pin
Phone Plug
(6P6C)
1 = Sig GND
2 = +5 VDC
3 = RXD
4 = TXD
5 = not used
6 = Sig GND
4
5
RXD
TXD
+5 V
10 feet [3.0 m] Maximum