C-more Micro EA-MG6-BZ2 Hardware User Manual - A–26
Omron FINS Protocol – PLC Error Code Table (cont’d)
(PLC generated error codes for the Omron FINS protocol continued on the next page.)
PLC Error Codes for Omron FINS
Panel Error Code
P499 Hex Value
Description
0x1104
Parameter Error: Address range exceeded.
0x1106
Parameter Error: Program Missing.
0x1109
Parameter Error: Relational Error.
0x110A
Parameter Error: Duplicate Data Access.
0x110B
Parameter Error: Response too long.
0x110C
Parameter Error: Parameter Error.
0x2002
Read Not Possible: Protected.
0x2003
Read Not Possible: Table missing.
0x2004
Read Not Possible: Data missing.
0x2005
Read Not Possible: Program missing.
0x2006
Read Not Possible: File missing.
0x2007
Read Not Possible: Data mismatch.
0x2101
Write Not Possible: Read Only.
0x2102
Write Not Possible: Protected - cannot write data link table.
0x2103
Write Not Possible: Cannot register.
0x2105
Write Not Possible: Program missing.
0x2106
Write Not Possible: File missing.
0x2107
Write Not Possible: File name already exists.
0x2108
Write Not Possible: Cannot change.
0x2201
Not executable in current mode: Not possible during execution.
0x2202
Not executable in current mode: Not possible while running.
0x2203
Not executable in current mode: Wrong PLC mode (Program).
0x2204
Not executable in current mode: Wrong PLC mode (Debug).
0x2205
Not executable in current mode: Wrong PLC mode (Monitor).
0x2206
Not executable in current mode: Wrong PLC mode (Run).
0x2207
Not executable in current mode: Specified node not polling node.
0x2208
Not executable in current mode: Step cannot be executed.
0x2301
No such device: File device missing.
0x2302
No such device: Missing memory.
0x2303
No such device: Clock missing.
0x2401
Cannot Start/Stop: Table missing.
0x2502
Unit Error: Memory Error.
0x2503
Unit Error: I/O setting Error.
0x2504
Unit Error: Too many I/O points.
0x2505
Unit Error: CPU bus error.
0x2506
Unit Error: I/O Duplication.
EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
®
A
Appendix A: Panel & PLC Error Code Tables