C.T.M. HS-2850 User Manual - page 10
User's Manual
HS-2850
Figure 9
Figure 9
Figure 10
Figure 10
OPERATING YOUR SCOOTER
8
Before beginning your journey with your new power chair, make sure power chair is on
a level surface and clear of any obstacle. Although your power chair is able to climb slopes,
it is safer to practice on a leveled surface.
1.Before operating with your power chair, check the following:
•free-wheeling lever is on D.
•speed dial is at the lowest speed (fully turned counterclockwise).
2.Sit on chair and fasten seat belt.
3.When power is turned on, all battery gauge LED lights should be lit lighting. The self-
diagnostic warning lights should not be blinking.
4.While resting your arm on armrests, joystick should be within reach. By pushing joystick
slightly forward, power chair will move forward slowly, and pushing joystick fully forward,
chair will move at normal speed. And adjusting speed dial will also decrease or increase
speed. Also, with joystick, you are able to turn chair in 360
o
. When joystick is let go and
back in center position, chair will stop.
5.Practice driving where there is no obstacle. Start at slowest speed and move forward
and backward; make some turns. As you get more comfortable, you can increase the
speed by turning speed dial knob clockwise.
(F)
(G)
(H)