C2STek CAT-1X User Manual - page 19
19 / 20
Defense Area Name
Alarm Type Code Define
Sensor Numbers Supported
H 1=
Fire
Alarm
2= Gas Leakage Alarm
3= Intrusion Alarm
4= Booth Open Alarm
5= Glass Broken Alarm
All areas supported 1/2/3/4/5 Alarm
type, and Each type can program
5Sensors maxium in one area. Example
H1 can program 5 same Smoke
Detectors
I
J
K
L
SMS Alarm Alerts Format:
Area Name+ Alarm Type+ Sensor ID, Date, Time, Speed, Heading, LAC/CID code + Address Google Link
Example
<<I Area,Gas Leakage Alarm I2;2014-06-06 14:42:49,A,0Km/H,Heading:0,LAC:2638,CID:0FA1;
http://maps.google.com/maps?hl=en& q=+22.54522,+113.92223 >>
All defense Area can be programmed to be switch ON and Off by SMS command:
*1234*AWAY*H# < Switch ON Area>
*1234*HOME*H# < Switch Off Area>
Default setting is all defense area in ON status.
How to program sensor to CAT-1X Box?
CAT-1X allow user to do sensor code programming via two methods: SMS Command and override via Panic
button + ACC ON/Off switch.
1. Override via panic button and ACC status:
Details please check <<
2.4.2 Transmitter and wireless sensor Program to Cat-1X box
>>
2. SMS Command for Wire sensors code Program
Code Program Process:
1) Confirm what type sensor and which area to be coded program
2) Edit SMS command *1234*CODE*H1#( H area, Smoke detector)and send to CAT-1X SIMCARD.
3) CAT-1X siren sound once indicates code pending start, within 20seconds; trigger the sensor, if success siren
sounds twice indicate success. And then start another 20seconds wait for second sensor input, maximum 5 sensors
can be programmed. Any fail, siren will sound BIBiBi and exit code program mode.
*1234*ERASECODE#
*1234*ERASECODE*H#
3.19 Daily Travel Mileage SMS report to Driver ( A authorization Phone No.)
CAT-1X designed to have a daily travel mileage SMS report to driver at defined time every day.
Mileage report SMS Format:
Configure Mileage Report Time by SMS Command:
*1234*REPTIME:09:36#