CA-FI Dashlinq4 User Manual - page 3
01
02
Chapter 1 Basic Operations
Warning:
When the system is reading the SD card please do not take it
out ;make sure you turn the device of before you plug out it, otherwise
you may damage the card.
1.1 Power Supply
This device is only used for 12v DC powered car, please do not install it
directly to 24v powered truck or bus.
1.2 Precautions
1.Please avoid the device working long hours in hot, humid environment
in case causing malfunction or other hazards.
2. The navigation and other functions of the device are only as a
reference aid while driving ,the user should combine it with specific road
conditions to make right judgments.
3. Please obey the traffic rules, do not operate this device to distract
attention while driving.
4. The route and navigation information shown in this device is only for
reference, due to traffic developments and changes it may not
accurately and timely react the latest information about the routes and
road conditions.
5. Using 3G mobile phone network or the internet via Wi-Fi connection
may cause pauses and delays due to speed.
6. If you want to download and install new software or add new
accessories( Such as reversing camera) , you should consult the
professional and technical personnel.
7. Do not press the LCD screen too hard, not use sharp objects to
scratch the LCD screen. Please clean the screen and remove dirts with
soft flannel.
8. To avoid potential risk of data loss, please frequently backup the data
on the SD card.
9. Do not use the device too long without starting the engine, it may
cause the battery power runs out.
1.3 Reset
When the device has no responses, for example, the screen switching
delays, stagnation, the screen is not smoothly switching; or click
function is executed too long and can not be activated;
Please press the reset(RST)button on the device panel to restart .
【Note 】
When the device has no response, you may lose unsaved
system information through the power switch button to restart the system.
Please backup your data regularly.
1.4 Storage Card
When using the SD card, please pay attention to the plugging
direction, user may refer to the icon besides the slot.
USB Port
the front device panel or
the USB port on
.
【
Note
】
1. The removable disk or HDD format must be the FAT format.
2. Pleas do not power off or swap cards during processing data.
1.6 Common buttons description
1.5
User can connect removable disk or HDD via
tail
Button
Function
Button
Function
Home
Mode
Mode Switching
Menu
Mute
Mute Switching
Exit
Radio
Radio
DIS
S
E
E
K
-
+
PW
V
O
L
-
+
VOL/ Off
(Long press)
GPS
Navigation App
Seek
Micro SD
SD/TFcard
Next
Reset
Reset
Prev
MIC
Microphone