CAAS Audio Digital Audio Server User Manual & Warranty - page 13
Streaming Music from a Phone / Tablet to the Audio Server
Note: This procedure differs slightly from device to device, so outlined here is a generic procedure that will
be similar to that required.
1. The audio server must be networked. Connect a LAN cable between the audio server LAN port and
your router.
2. Set up a connection between your smart device and the audio server. This can be done using a
procedure such as the below, however this does differ from device to device:
3. Make sure your smart device is connected to your home network via WiFi. If you are not sure how to
do this, information on how to do this can be found on the internet or in your smart device manual.
4. On your Smart device: You first need to install and set up “XBMC Remote”or “Yatse”. The
procedure to do this is directly below! (the next section).
5. Once XBMC Remote has been installed, you should be able to access
your music files on your
smart device (e.g. On Android → All Apps → Music).
6. Once in “Music”, there should be an icon for selecting a player, possibly at the top of the screen.
Choose Select player.
7. Then under WiFi player you should see something like XBMC or CAAS Audio Server, select this and
hit “Done”.
8. Any music files you play on your smart device should now be sent to the DAS.
9. Note this procedure does differ from device to device and for iOS systems but the information you'll
need is readily available on the internet.
Page 13