CABAC 3031 Manual - Englsih

Battery Replacement

ENGLSIH

9

• L LED lights up for Left rotary field. 

•  Measurement principle: The instrument detects the pha-

se rising order regarding the user as earth.

  Function of this test may not be fully achieved if the 

insulation condition/ grounding conditions of user or of 

the equipment under test is not good enough. 

7.4 Continuity test 

  Make sure the object under test isn’t live. 

•  Connect both test probes to the object under test. Con-

tinuity LED lights up and buzzer sounds continuously to 

indicate continuity 

7.5 Torch light

•  Pressing the torch light button to turn on the light and 

after approx. 10s it will turn itself off 

8. Battery Replacement

   Remove the probes from any testing point, when 

opening the Battery case. Batteries are dead when 

the continuity test with both test probes connected 

cannot be done anymore. A battery symbol in the 

LCD indicates low battery. 

Follow the procedure below and replace batteries with 

new ones (type IEC LR03 1.5V). 

•  Unscrew the battery door, e.g. with a coin.

•  Pull out the Battery door and replace the batteries. Insert 

new batteries according to the engraving on the Battery 

door. 

• Re-assemble battery door.

•  Confirm  that  the  Battery  door  case  is  properly  locked 

 prior to measurements.