Cable Electronics MP75 Instruction Manual - page 10
9
SYSTEM SETUP
Press the SETUP button on the remote. The
screen shown here will appear.
1. To press ▲ or ▼ to select item to
change
2. Press ENTER to change the setup. Press
HOME to return to previous menu.
3. Keep pressing HOME to exit from the
SETUP screen.
Setup Menu Options
• Language: English, Deutsch, Spanish, and
French
• Video Output Mode: NTSC and PAL or
Video resolutions
• Audio Output Mode: Normal, SPDIF
LCPM, SPDIF RAW
• Update firmware: This is used when
supplied with a firmware update file on the
Storage Device
• System Information: Current Firmware
Note: When Audio NORMAL is selected, this
means the NTSC output will have audio on the
R/L RCAs and the HDMI will have audio
imbedded in the HDMI signal. When SPDIF is
enabled, this disables the normal audio output
path.